J&S Jacks Big Wheel Motorcycle Lift

By customer demand we have developed a new "BIG WHEEL" lift.

Many of our motorcycle dealer friends and retail customers alike had asked us to come up with a design that both, rolls easier, and will not hurt finished floors such as tile, linoleum, wood, carpet, and paint. So it was back to the drawing board.

J&S Jacks Big Wheel Motorcycle Lift
$339 plus S&H

After thoroughly testing many different types, sizes, and makes of wheels we selected the American made, Albion, all roller bearing, phenolic, (the same stuff bowling balls are made of) 3" wheel. In order to make these wheels work, our lift had to get substantially longer and slightly wider, gussets for additional strength in the rear caster brackets were also added. The results were a lift with all the features of our standard Super Lift model with the benefits of the phenolic all roller bearing wheel that include ultra ease of rolling AND the ability to roll on surfaces such as porous concrete, and asphalt. The "Big Wheel" will also allow you to roll on finished floors such as, tile, linoleum, carpet, wood, paint, etc without marring, or cutting.

The "Big Wheel" lift comes with:

• FOUR LARGE 3" ALBION ALL ROLLER BEARING PHENOLIC WHEELS
• 1 3/4" WIDE RUBBER COATED LIFT TABLES
• Dimensions are 37" long x 24" wide
• 6 TON BOTTLE JACK
• 2000# CAPACITY
• TWO STOP BOLTS to keep your bike from rolling away on a pitched surface.
• 5 POSTION SAFETY STOPS
• POWDER COAT PAINT
• GRADE 5 HARDWARE
• UNHEARD OF STABILITY (you have seen our demonstrations at shows throughout the country)
• LOW PROFILE (4" fits under bikes with 1" lowering kits)
• FULL LIFT HEIGHT is 18"
• NO ADAPTERS NEEDED FOR ANY HARLEY-DAVIDSON BIG TWIN (includes Dyna models)
• EACH LIFT INDIVIDUALLY HAND MADE
• ALL UNITS FACTORY TESTED
• ALL MIG WELDED CONSTRUCTION
• DELIVERED ASSEMBLED (you install 2 bolts and hook up foot pedal return spring)

The stability with our lifts is the best on the market, no tie downs are required to hold your motorcycle, it will be safe and secure on a J&S Motorcycle lift!

Simply wheel your lift under your motorcycle and pick it up right off the kickstand. No need to stand the bike up and attempt to get the lift under while holding the bike. We have designed our lift to gently rock the motorcycle off its stand and onto the lift. (See video) When lowering the bike, control the speed with the release knob and gently set your bike right back on the kickstand. One person, hands free operation.

[ Back to Products ]